Bentley Motors BENTAYGA V8 recall: The nut of the eccentric screw could break on the rear axle lower lever arm
Yes – some of these vehicles are being recalled
- What's wrong
- The nut of the eccentric screw could break on the rear axle lower lever arm which may cause alterations in the wheel alignment of the rear axle.
- What to do
- Contact a Bentley Motors dealer to book the free repair. Replace with new known correct nuts from outside identified manufacturing batches. If the screw connection is already damaged this will additionally be replaced.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The nut of the eccentric screw could break on the rear axle lower lever arm which may cause alterations in the wheel alignment of the rear axle.
The fix
Replace with new known correct nuts from outside identified manufacturing batches. If the screw connection is already damaged this will additionally be replaced.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| BENTAYGA V8 | 4 Dec 2020 | 7 Dec 2020 | 12 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 31 May 2021. This page summarises an official notice. Details can change – always follow the official notice.