Toyota (Gb) Corolla and C-hr recall: A possibility that a bolt of the brake pedal bracket may not have been torqued correctly
Yes – some of these vehicles are being recalled
- What's wrong
- A possibility that a bolt of the brake pedal bracket may not have been torqued correctly.
- What to do
- Contact a Toyota (Gb) dealer to book the free repair. Tighten the bolt of the brake pedal bracket to the appropriate torque.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
A possibility that a bolt of the brake pedal bracket may not have been torqued correctly.
The fix
Tighten the bolt of the brake pedal bracket to the appropriate torque.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Corolla | 15 Jun 2019 | 20 May 2020 | 9,751 |
| C-hr | 10 Jun 2019 | 29 May 2020 | 9,751 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 14 December 2020. This page summarises an official notice. Details can change – always follow the official notice.