Every UK recall and safety alert for Kia products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 39 listed.
Due to a quality deviation by the supplier certain battery cells within the High Voltage Battery System Assembly manufactured in limited production periods may have been produced with a misaligned electrode. A misaligned electrode…
Front & 2nd row (left & right side) seat belt retaining bolts are not correctly fastened on some vehicles. If affected the seat belt restraint is compromised and there is a chance of an…
Due to changes in production some areas have uneven material and strength to improve the bonnets outer appearance. As a result if the vehicle impacts a pedestrian the risk of injury may be higher.
Fuel leakage may occur due to contact between the fuel line and the battery tray cable. For affected cars this may lead to damage of the fuel line and the risk of a fuel…
The rear centre seatbelt anchor buckle may not latch properly. This is due to a manufacturing error by the supplier the buckle may fail to fully engage when the tongue is inserted. A seatbelt…
On some vehicles the second-row lower seat bolts may not have been installed. On effected cars a missing bolt may increase the risk of injury if the vehicle was subjected to a collision from…
Potential that the right-hand front shock absorber lower bracket welding may fail and the shock absorber becomes detached from the lower arm. This would cause the vehicle ride height to drop at the front…
The instrument cluster screen may respond slowly immediately after starting the vehicle. During this condition activating the turn signal can cause the cluster to reset or the Blind View Monitor (BVM) within the cluster…
When the turn signal is switched off after operating the turn signal or hazard light more than 5 minutes the upper part of Daytime Running Light (DRL) stays off. The DRL will subsequently not…
Due to an error by a plant assembly worker some of the seat mounting bolts may be missing in the subject vehicles. Seats with missing seat mounting bolts may not properly restrain an occupant…
The printed circuit board (PCB) in the Hydraulic Clutch Actuator (HCA) may become contaminated with fluid. A fluid contaminated PCB may lead to an electrical short circuit which in extreme cases may potentially result…
The printed circuit board (PCB) in the Hydraulic Clutch Actuator (HCA) may become contaminated with fluid. A fluid contaminated PCB may lead to an electrical short circuit which in extreme cases may potentially result…
The vacuum pump drive gear may be damaged by a mechanical failure caused by high acceleration torque during the engine starting phase. If the pump fails an increase of the brake pedal force may…
The HECU hydraulic electronic control unit of affected vehicles equipped with Anti-lock Brake Systems ABS and Electronic Stability Control ESC could leak internally and cause an electrical short over time. In extreme cases the…
On affected vehicles the manufacturer has determined that due to an error with the Integrated Electronic Brake (IEB) software repeated Remote Smart Parking Assist (RSPA) stops may result in extended stopping distances while using…
The Intelligent Speed Limit Assist (ISLA) system may not function properly due to an incorrect software version of the instrument cluster and the ISLA camera coding partially missing. As a result there may be…
On affected vehicles due to Improper torque applied to the Gear Drive Unit during assembly by the differential gear supplier they may exhibit a grinding noise while driving which can result in a loss…
On affected vehicles a short circuit inside the EGR (Exhaust Gas Circulation) valve may occur potentially causing the engine to stall before a warning light is displayed.
On affected vehicles due to exposure to radiant heat from the exhaust manifold the turbocharger oil feed pipe and hose assembly may deteriorate over time this could cause an oil leak.
On affected vehicles misalignment of the fuel control valve plunger in the high pressure fuel pump can result in uneven wear. This may potentially result in loss of motive power and in some cases…
On affected vehicles unintended deployment of the curtain air bags may occur due to a welding issue within the hybrid inflator.
On affected vehicles The Integrated Charging Control Unit (ICCU) may become damaged over time and may not be able to charge the 12-volt battery which can discharge gradually while driving with a progressive reduction…
On affected vehicles an improperly treated driveshaft may break under load resulting in the loss of drive
On affected vehicles the battery management system may not detect a battery cell abnormality within the high-voltage battery pack