Mitsubishi ASX 1.6 recall: Mitsubishi ASX Exhaust
On affected vehicles a crack may occur at the welded joint of rear muffler to tail pipe resulting in potential detachment of the tail pipe.
Every UK recall and safety alert for Mitsubishi products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 31 listed.
On affected vehicles a crack may occur at the welded joint of rear muffler to tail pipe resulting in potential detachment of the tail pipe.
The front wheel moulding could become detached and fall from the vehicle.
If there is an object in front of the vehicle the FCM camera system may incorrectly detect it as a pedestrian depending on road circumstances.
The airbag inflator might have a different airbag deployment performance than designed providing less protection.
Water may penetrate into the brake vacuum pump causing corrosion.
The right front lower arm assembly could be broken due to improper welding by the supplier.
The right side second row seat belt may be assembled incorrectly.
Corrosion of fixing rivets can lead to the side step shade becoming insecure
It may not be possible to start the engine in order to charge the main drive battery.
Activation of a non-desiccated ammonium nitrate inflator with degraded propellant may result in an inflator rupture.
Inappropriate ECU program for battery deterioration judgement.
Power steering drive belt automatic tensioner may crack and fail.
The sunroof glass may detach from the sunroof assembly.
Driver assist programme functions through the hydraulic brake unit may be interrupted.
Collision avoidance system may activate the brake for longer than necessary.
Exhaust tailpipe section may crack at silencer weld.
Due to improper sealing of parking brake caliper shaft boots water might penetrate inside and rust the shaft. As the result of continuous use the rust will erode into the internal caliper and the…
Due to inappropriate water proof structure of the front deck water can drop on the wiper link. The wiper link ball joint may corrode and cause excessive wear of the resin part of the…
The propellant in the passengers front airbag inflator may deteriorate due to high temperature and humid conditions over a longer period in use. As a result the inflator body may rupture during airbag deployment…
The locking mechanism in the door latch assembly may not operate properly in high temperatures. As a result the door may not latch correctly and may unintentionally open whilst driving. This may affect one…
Due to inappropriate waterproofing water may be drawn into the front wiper motor and/or may cause corrosion of the wiper link ball joint. This may over time cause the wipers to fail.
The engine Electronic Control Unit Relay may overheat and fail. This could interrupt power supply to the engine and will cause the engine malfunction warning lamp to illuminate. The engine may stall and may…
The locking mechanism in the door latch assembly may not operate properly in high temperatures. As a result the door may latch correctly and may unintentionally open whilst driving.
Due to inappropriate water proof structure of the front deck water can ingress into the wiper motor. Water accumulated around the air breather hole might enter into the wiper motor when the motor is…