Every UK recall and safety alert for Peugeot products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 90 listed.
On affected vehicles air defelectors may have been installed incorrectly to the front bumbper grille which can affect the airflow required for cooling the engine and 48V battery system
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
Affected vehicles may have a tyre class mismatch between the technical specification declared in the Certificate of Conformity and the actual vehicle configuration.
On affected vehicles the Body Control Module is not correctly configured to detect a failure in the indicator lamps. As a result if a turn indicator bulb fails it's not detected and the indicator…
Affected vehicle have a horn volume which does not comply with regulatory requirements.
Affected vehicles may experience an unexpected deactivation of the interior door handles when the key is in engine-running mode which could result in occupants being unable to exit.
Affected vehicles have a smart tachograph fitted that may not comply with regulatory requirements.
On affected vehicles the front suspension lower control arm upper bolts may not have been tightened according to specification during assembly.
On affected vehicles the Lane Keep Assist tell-tale fails to illuminate if the front camera is blocked meaning no warning light appears in the instrument cluster.
On affected vehicles the Motor Control Unit (MCU) Inverter may have a manufacturing deviation which could lead to gearbox malfunctions and the risk of an internal electrical short circuit leading to overheating or a…
On certain Peugeot vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster. An additional…
Affected vehicles may have a cylinder block with a missing cooling nozzle. A missing nozzle means the piston may not be adequately cooled causing it to weaken deform or break and leading to sudden…
On affected vehicles due to a production nonconformity the water pump may malfunction which may cause a loss of engine power and result in the engine shutting down.
Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility…
Affected vehicles may have been fitted with fuel return pipes not according to specification which can lead to a fuel leak.
Affected vehicles may have improperly tightened wheel nuts following a faulty rework.
On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.
On affected vehicles the incorrect wheel bolts may have been fitted which could result in loosening or loss of the bolts.
Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.
On affected vehicles the front left and right control arm ball-joint bracket screws are at risk of fracture which could affect the vehicle's controllability.
On affected vehicles there is an issue with the Engine Control Module (ECM) calibration which may lead to non-compliance with regulatory emission requirements.
On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.
Affected vehicles may have incorrect or missing tyre pressure messages displayed in the instrument cluster due to a software deviation.
Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.