Every UK recall and safety alert for Vauxhall products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 40 listed.
Affected vehicles may have Vehicle Supervision Module (VSM) software that displays incorrect speed-limit indications resulting in non-compliance with applicable regulatory requirements.
On affected vehicles a software defect in the instrument cluster may prevent the cluster display from switching on when the vehicle is started resulting in a black screen.
On affected vehicles the Body Control Module is not correctly configured to detect a failure in the indicator lamps. As a result if a turn indicator bulb fails it's not detected and the indicator…
Affected vehicles may experience an unexpected deactivation of the interior door handles when the key is in engine-running mode which could result in occupants being unable to exit.
Affected vehicles may have an incorrectly routed fuel pipe at risk of contact with other components which could lead to a fuel leak or risk of fire.
Affected vehicles have a smart tachograph fitted that may not comply with regulatory requirements.
Due to a mechanical failure in the reducer bearing combined with a specific defect in the Electric Power Steering (EPS) software calibration affected vehicles may experience a loss of power steering which in the…
On affected vehicles the Lane Keep Assist tell-tale fails to illuminate if the front camera is blocked meaning no warning light appears in the instrument cluster.
On certain Vauxhall Astra L vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster.…
On affected vehicles due to a production nonconformity the water pump may malfunction which may cause a loss of engine power and result in the engine shutting down.
Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility…
On affected vehicles the front camera module calibration may be incorrect which may lead to non-compliance with the speed limit indication system regulatory requirement.
Affected vehicles may have been fitted with fuel return pipes not according to specification which can lead to a fuel leak.
On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak.
On affected vehicles the incorrect wheel bolts may have been fitted which could result in loosening or loss of the bolts.
Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view.
Affected vehicles may have the Headlamp Height Level sensor fitted with incorrect orientation causing the Headlamp beam to be aimed too low and does not adjust as it should.
On affected vehicles the chemicals in the Takata airbag inflators may deteriorate over time. This may cause the inflators to rupture with too much force in a crash leading to serious injury or death…
On affected vehicles the front left and right control arm ball-joint bracket screws are at risk of fracture which could affect the vehicle's controllability.
On affected vehicles there may be an insufficient brake pedal bracket connection due to a missing or incorrectly assembled pin. If the pin falls out the brake pedal will potentially disengage.
On affected vehicles there is an issue with the Engine Control Module (ECM) calibration which may lead to non-compliance with regulatory emission requirements.
Affected vehicles may have incorrect or missing tyre pressure messages displayed in the instrument cluster due to a software deviation.
Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration.
On affected vehicles the engine will run all the time and will not shut off in start/stop mode due to incorrect Body Control Module coding.