All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
For affected vehicles the AdBlue Dosing Module may not have been initialised during the production process. In this condition the AdBlue Dosing Module does not trigger AdBlue injection and therefore NOx emissions are not…
Certain vehicles were built with a potential issue affecting the coolant pump. This issue may lead to an engine failure causing a sudden loss of power without prior warning.
The EU directive for commercial vehicles with the Euro 6 emissions standard stipulates that the NOx sensor signal is regularly checked for plausibility. The IUPR monitor (In Use Performance Ratio) was defined for this…
On affected vehicles a concern has been identified where the third-row lower seat belt anchorage bracket may contain a weld stud of insufficient ISO strength due to material contamination at the supplier. An insufficiently…
On affected vehicles de-bonding of the rear polycarbonate cabin window may occur when driven at high speeds with the windows open.
On affected vehicles due to a Body Control Module (BCM) software weakness an alarm siren may randomly trigger when the vehicle is locked.
On affected vehicles the software repair for previous recall 20S10 may not have been delivered properly and vehicles may exhibit an issue where the transmission lubricant pump gear could fail.
On affected vehicles one of the front suspension bolts may have been overtightened during manufacturer which may cause it to weaken and fracture over time.
On affected motorcycles the indicator wire may have been incorrectly routed during production which may cause a short circuit that can lead to malfunctions in the turn signal system (front and rear) brake lights…
This safety recall involves bolts which fix the left and right side rear seat safety belts to the vehicle body or bolts which fix the rear bench seat configuration backrest locking brackets to the…
A breakage of steering pushrods and steering rods ball studs cannot be ruled out.
The driver airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. This condition is more likely to occur if the vehicle has been exposed to high levels of…
In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and…
In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and…
The driver airbag inflator housing may rupture due to excessive internal pressure during normal airbag deployment events. This condition is more likely to occur if the vehicle has been exposed to high levels of…
In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and…
The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior…
The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior…
The front passenger airbag inflator (PAB) may contain propellant that could possibly degrade over a period of time. This may cause metal fragments to pass through the air bag and into the vehicle interior…
Passenger air bag may deploy incorrectly if activated.
Passenger air bag may deploy incorrectly if activated.
Certain affected vehicles may not have the remedy for Compliance Recall 24C12 installed correctly
On affected vehicles due to a production nonconformity there may be contact or a reduced clearance between the fuel Particulate Filter pipe and the pole protection cup of the 48V Belt Starter Generator. Under…
The Safety Recall relates to the air-conditioning wiring harness located behind the dashboard. On the affected vehicles the wiring harness was fixed very close to a screw connection on the interior microfilter housing cover.…