Mercedes-Benz C-class and E-class recall: A lock nut may be cracked in the steering gear
A lock nut may be cracked in the steering gear.
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
A lock nut may be cracked in the steering gear.
One or more of the four locknuts securing the drivers airbag might be insufficiently tightened.
The EGR oil hose is not according to specification regarding geometry.
The ESP control unit may not be initialised as intended during the start-up process.
Shock absorbers that are too long may have been installed. As a result the brake hoses may be under too much tension.
Electric power steering sensor may have been manufactured outside of the specification.
The flat conductor of the starter wiring harness might not have been routed according to specifications.
The indicated fuel level may be inaccurate.
Incorrect positioning of the lower steering column mounting bracket with a risk of loosening.
Possible insufficient torque applied to the retaining bolts of the propshaft.
The driver and passenger seat rails may have been incorrectly assembled.
There is a possibility that the side airbag sensors are not tightened to specification.
The front drivers air bag may not deploy correctly on activation.
An incorrect tightening torque of the fixing bolts of the left front seat.
Driver multi-function display inaccurate remaining fuel mileage range.
Capacitors for the engine cooling fan assembly do not comply with specification.
The air conditioning compressor pulley could break and damage other components.
Front suspension arm securing bolt may break.
The steering rack fixation may be damaged and could affect the security of the rack.
The bolts on the suspension rear arm could be deformed and may detach.
Rear leaf spring front eye may fracture.
It is possible that fuel may escape from one or both fuel rails (low-pressure side).
Vehicles failed to routinely achieve the required levels of CO2 emissions.
An engine mount bolt may have not have sufficient thread length.