All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
On affected vehicles due to decrease of the grease amount in the worm wheel gear meshing area of the EPS gear box during use the sliding resistance at the meshing area increases and the…
On affected motorcycles the clutch release shaft was not properly welded to the lever due to an improper manufacturing process.
On a small percentage of affected vehicles upon vehicle power up the car computer board may experience a short resulting in the loss of rear view camera functionality .
On affected tyres there is the potential for the occurrence of a circumferential crack in the bead area which could present an increased risk of rapid tyre pressure loss.
On affected vehicles the bonding strength of the wheelchair ramp to hinge plate may not meet requirements. A de-bonded ramp could collapse without warning while in use.
On affected vehicles the rear brake hoses may not have been crimped correctly during production.
On affected vehicles incorrect data has been entered on the registration document and correspondingly the Certificate of Conformity (CoC).
On affected vehicles incorrect data has been entered on the registration document and correspondingly the Certificate of Conformity (CoC).
Hyundai has identified that the alternator electrical wiring harness may be incorrectly tightened within the engine bay junction box which may result in a high electrical resistance.
On affected vehicles the High Voltage (HV) Battery may have a manufacturing defect which could cause the battery cells to overheat when the HV Battery is fully charged. In a worst-case scenario there is…
Affected vehicles may face an error in the Battery Monitoring Unit software.
Affected vehicles may face an error in the Battery Monitoring Unit software.
Affected vehicles may face an error in the Battery Monitoring Unit software.
Affected vehicles may face an error in the Battery Monitoring Unit software.
On affected vehicles engine compartment covers were fitted that if incorrectly installed can come loose from their attachments. An unsecured engine compartment cover could touch the hot area of the turbocharger and result in…
Affected vehicles may experience chafing between the fuel line support shield and the fuel line which could result in damage to the fuel line.
The rear seat backrest may not comply with crash safety requirements due to an inadequate weld joint. This means that there is an increased risk of rear seat passengers being injured in the event…
Affected tyres do not comply with UNECE regulations which could potentially result in tread deformation or crown separation at high speeds.
Kubota has identified that in specific circumstances during drives on the road for long periods of time at high speed and without pushing the brake pedal pushing the brake pedal for the first time…
On affected vehicles the throttle lever may not fully return to the idle position.
On affected motorcycles there is a risk the terminals of the motor drive battery packs may become dislodged during plugging or unplugging of the battery packs due to a manufacturing error.
Affected vehicles may face an error in the Battery Monitoring Unit software.
Affected vehicles may experience an Autonomous Telematic Box (ATB) that cannot connect to the remote server.
On affected vehicles operating with a software release prior to 2023.38.4 an overvoltage breakdown in the steering rack may overstress motor drive components on the printed circuit board. If the overstress condition occurs while…