Alpina B3 and D3 recall: The blower-regulator wiring could be damaged and could lead to partial contact of individual wire strands
Yes – some of these vehicles are being recalled
- What's wrong
- The blower-regulator wiring could be damaged and could lead to partial contact of individual wire strands.
- What to do
- Contact a Alpina dealer to book the free repair. The blower-regulator wiring harness will be inspected and a new part will be installed. Additional components will be replaced if necessary as determined at the time of repair.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The blower-regulator wiring could be damaged and could lead to partial contact of individual wire strands.
The fix
The blower-regulator wiring harness will be inspected and a new part will be installed. Additional components will be replaced if necessary as determined at the time of repair.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| B3 | 20 Jul 2004 | 8 Jul 2011 | 2,469 |
| D3 | 20 Jul 2004 | 8 Jul 2011 | 2,469 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 18 May 2018. This page summarises an official notice. Details can change – always follow the official notice.