Audi E-tron recall: Replacing brake servo
- What's wrong
- On certain Audi e-tron vehicles the bolted connection between the brake pedal and brake servo might not be properly secured. If it loosens the mechanical link between the foot brake and brake servo could fail. In such cases braking would only be possible using the…
- What to do
- Contact a Audi dealer to book the free repair. For safety reasons the brake servo must be replaced on the affected vehicles.
What’s wrong
On certain Audi e-tron vehicles the bolted connection between the brake pedal and brake servo might not be properly secured. If it loosens the mechanical link between the foot brake and brake servo could fail. In such cases braking would only be possible using the controlled emergency braking function by holding the parking brake button on the centre console (see Owner’s Manual).
The fix
For safety reasons the brake servo must be replaced on the affected vehicles.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| E-tron | 24 May 2019 | 16 Oct 2019 | 37 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 6 September 2024. This page summarises an official notice. Details can change – always follow the official notice.