Audi Q2 and A3 recall: Rear hub carriers not manufactured to correct standard
Yes – some of these vehicles are being recalled
- What's wrong
- The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be abnormal noises bad tyre wear and a theoretical possibility of wheel…
- What to do
- Contact a Audi dealer to book the free repair. Recall the vehicles that are likely to be affected and replace the right and left rear wheel bearing housings.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The hardening process for the rear wheel bearing housings may not have been correctly performed. In the worst case this could lead to a fractured housing. Should a fractured housing occur there would be abnormal noises bad tyre wear and a theoretical possibility of wheel loss.
The fix
Recall the vehicles that are likely to be affected and replace the right and left rear wheel bearing housings.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Q2 | 1 Aug 2017 | 31 Aug 2017 | 30 |
| A3 | 1 Aug 2017 | 31 Aug 2017 | 30 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 17 November 2017. This page summarises an official notice. Details can change – always follow the official notice.