Audi Q3 and A3 recall: The bolted connection on the input rod between the electromechanical brake servo and brake pedal can be come loose
Yes – some of these vehicles are being recalled
- What's wrong
- The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting in a loss of all service braking ability.�
- What to do
- Contact a Audi dealer to book the free repair. Vehicles are not to be driven and the bolted connection of the input rod between the electromechanical brake servo and brake pedal must be checked and if necessary retightened.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting in a loss of all service braking ability.�
The fix
Vehicles are not to be driven and the bolted connection of the input rod between the electromechanical brake servo and brake pedal must be checked and if necessary retightened.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Q3 | 24 Aug 2020 | 5 May 2021 | 11 |
| A3 | 24 Aug 2020 | 6 May 2021 | 11 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 10 September 2021. This page summarises an official notice. Details can change – always follow the official notice.