BYD B11E02 and B12E04 recall: Steering Box Mating Surfaces Contaminated with Anti-Corrosion Paint
Yes – some of these vehicles are being recalled
- What's wrong
- During anti-corrosion treatment the steering box mounting surfaces were not adequately masked. As a result anti-corrosion paint contaminated the mating surfaces leading to insufficient metal-to-metal contact when the steering box was installed. This can cause the steering box to loosen over time potentially affecting steering…
- What to do
- Contact a BYD dealer to book the free repair. Removed anti corrosion paint from mating surfaces.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
During anti-corrosion treatment the steering box mounting surfaces were not adequately masked. As a result anti-corrosion paint contaminated the mating surfaces leading to insufficient metal-to-metal contact when the steering box was installed. This can cause the steering box to loosen over time potentially affecting steering control.
The fix
Removed anti corrosion paint from mating surfaces.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| B11E02 | 23 Jul 2024 | 28 Dec 2025 | 489 |
| B12E04 | 1 Feb 2024 | 28 Dec 2024 | 5 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 29 December 2025. This page summarises an official notice. Details can change – always follow the official notice.