Honda Motor Co NSX recall: Printed circuit board screws secured to high mount stop lamp housing may shift and contact the pcb circuitry
Yes – some of these vehicles are being recalled
- What's wrong
- The metal screws that secure the printed circuit board to the high mount stop lamp housing may contact the PCB circuitry.
- What to do
- Contact a Honda Motor Co dealer to book the free repair. Affected vehicles require replacement of the high mount stop lamp.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The metal screws that secure the printed circuit board to the high mount stop lamp housing may contact the PCB circuitry.
The fix
Affected vehicles require replacement of the high mount stop lamp.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| NSX | 2 Aug 2016 | 25 Jul 2017 | 103 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 16 November 2018. This page summarises an official notice. Details can change – always follow the official notice.