Hymer Gmbh & Co Kg recall: Inspect Aguti ISOFIX bracket and replace if necessary
Yes – some of these vehicles are being recalled
- What's wrong
- On affected vehicles the welded connection of the ISOFIX anchorage points may have been manufactured incorrectly. In very isolated cases it cannot be completely ruled out that the ISOFIX brackets could break in the event of a rear-end collision or vehicle crash.
- What to do
- Contact a Hymer Gmbh & Co Kg dealer to book the free repair. The ISOFIX system will be inspected and replaced if necessary.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
On affected vehicles the welded connection of the ISOFIX anchorage points may have been manufactured incorrectly. In very isolated cases it cannot be completely ruled out that the ISOFIX brackets could break in the event of a rear-end collision or vehicle crash.
The fix
The ISOFIX system will be inspected and replaced if necessary.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Ayers Rock | 1 Jan 2018 | 31 Aug 2026 | 13 |
| Grand Canyon | 1 Jan 2018 | 31 Aug 2026 | 5 |
| Yellowstone | 1 Jan 2018 | 31 Aug 2026 | 4 |
| Yosemite | 1 Jan 2018 | 31 Aug 2026 | 7 |
| Free S | 1 Jan 2018 | 31 Aug 2026 | 305 |
| Grand Canyon S | 1 Jan 2018 | 31 Aug 2026 | 132 |
| BMC | 1 Jan 2018 | 31 Aug 2026 | 11 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 22 July 2026. This page summarises an official notice. Details can change – always follow the official notice.