Jeep Avenger Mhev recall: Fuel particulate filter pressure pipe
- What's wrong
- On affected vehicles due to a production nonconformity there may be contact or a reduced clearance between the fuel Particulate Filter pipe and the pole protection cup of the 48V Belt Starter Generator. Under wet conditions there is a possibility that this insufficient clearance may…
- What to do
- Contact a Jeep dealer to book the free repair. Replace the pole protection cup of the 48V Belt Starter Generator. In addition check the distance between the fuel Particulate Filter pipe and the pole protection cup of the 48V…
What’s wrong
On affected vehicles due to a production nonconformity there may be contact or a reduced clearance between the fuel Particulate Filter pipe and the pole protection cup of the 48V Belt Starter Generator. Under wet conditions there is a possibility that this insufficient clearance may lead to water infiltration creating an electrical arc which could trigger a thermal event such as overheating. In the worst-case scenario this could result in a risk of fire in the engine compartment.
The fix
Replace the pole protection cup of the 48V Belt Starter Generator. In addition check the distance between the fuel Particulate Filter pipe and the pole protection cup of the 48V Belt Starter Generator. If the distance is less than 10 mm re-position the pipe or replace the pipe if damaged.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Avenger Mhev | 25 May 2023 | 19 Jan 2026 | 4,966 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 6 April 2026. This page summarises an official notice. Details can change – always follow the official notice.