Mazda RX-8 recall: Front lower suspension arm ball joint casting may crack / break
Yes – some of these vehicles are being recalled
- What's wrong
- The front lower arm ball joint casting may have a crack due to inappropriate manufacturing process being used. In extreme driving conditions this could cause the casting to break and the ball joint to become detached. If this happens it could result in the driver…
- What to do
- Contact a Mazda dealer to book the free repair. Replace both left side and right side lower arms with modified units.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The front lower arm ball joint casting may have a crack due to inappropriate manufacturing process being used. In extreme driving conditions this could cause the casting to break and the ball joint to become detached. If this happens it could result in the driver losing control of the vehicle.
The fix
Replace both left side and right side lower arms with modified units.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| RX-8 | 28 Jul 2003 | 7 May 2004 | 8,030 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 31 January 2018. This page summarises an official notice. Details can change – always follow the official notice.