Porsche GT3RS, 911 CARRERA, Speedster recall: The threaded connections of the upper control arms at the rear axle were not tightened with the specific tigtening torque
Yes – some of these vehicles are being recalled
- What's wrong
- Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.
- What to do
- Contact a Porsche dealer to book the free repair. The chassis bolts will be replaced and tightened with the specified tightening torque.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
Threaded connections of the upper control arms at the rear axle may not be tightened with the specified tightening torque.
The fix
The chassis bolts will be replaced and tightened with the specified tightening torque.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| GT3RS | 20 Aug 2019 | 17 Jan 2020 | 2 |
| 911 CARRERA | 20 Aug 2019 | 17 Jan 2020 | 2 |
| Speedster | 20 Aug 2019 | 17 Jan 2020 | 2 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 24 March 2021. This page summarises an official notice. Details can change – always follow the official notice.