SEAT Cupra Formentor recall: The input rod bolt connection between the electronic brake servo and the brake pedal may come loose
Yes – some of these vehicles are being recalled
- What's wrong
- The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting in a loss of all service braking ability.�
- What to do
- Contact a SEAT dealer to book the free repair. Vehicles are not to be driven and the bolted connection of the input rod between the electromechanical brake servo and brake pedal must be checked and if necessary retightened.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The bolted connection of the pull rod between the electromechanical brake servo and brake pedal may come loose resulting in a loss of all service braking ability.�
The fix
Vehicles are not to be driven and the bolted connection of the input rod between the electromechanical brake servo and brake pedal must be checked and if necessary retightened.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Cupra Formentor | 24 Nov 2020 | 24 Nov 2020 | 1 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 10 September 2021. This page summarises an official notice. Details can change – always follow the official notice.