SEAT Tarraco recall: Possibility that four of the six welding points on the bottom connection of the impact beam for the rear left door are too small
Yes – some of these vehicles are being recalled
- What's wrong
- On vehicles manufactured in a specific period there is a possibility that four of the six welding points on the bottom connection of the impact beam for the rear left door are too small.
- What to do
- Contact a SEAT dealer to book the free repair. The serial number of the rear left door must be checked and if necessary the rear left door must be replaced.�
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
On vehicles manufactured in a specific period there is a possibility that four of the six welding points on the bottom connection of the impact beam for the rear left door are too small.
The fix
The serial number of the rear left door must be checked and if necessary the rear left door must be replaced.�
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Tarraco | 13 Jan 2023 | 26 Jan 2023 | 4 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 10 July 2023. This page summarises an official notice. Details can change – always follow the official notice.