Toyota (Gb) Aygo recall: An incorrect tooling setup during the manufacturing of the fuel tank may result in reduced wall thickness or small pin hole in the tank’s bottom surface
Yes – some of these vehicles are being recalled
- What's wrong
- An incorrect tooling setup during the manufacturing of the fuel tank may result in reduced wall thickness
- What to do
- Contact a Toyota (Gb) dealer to book the free repair. Check the serial number and replace the fuel tank if necessary.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
An incorrect tooling setup during the manufacturing of the fuel tank may result in reduced wall thickness
The fix
Check the serial number and replace the fuel tank if necessary.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Aygo | 30 Jun 2016 | 30 Jun 2016 | 3 |
| Aygo | 26 Aug 2011 | 26 Aug 2011 | 3 |
| Aygo | 23 Feb 2015 | 23 Feb 2015 | 3 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 21 January 2019. This page summarises an official notice. Details can change – always follow the official notice.