Every UK recall and safety alert for Bmw Motorrad products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 25 listed.
In affected machines a component of the ignition steering-lock assembly may in isolated cases develop vibration induced wear which can lead to loss of electrical contact and consequently to loss of ignition. If ignition…
Due to an insufficiently sealed cable shoe moisture can rise within the cable and in unfavourable cases reach the 12 V connector to the DC/DC converter. This can lead to corrosion on the electrical…
The indicator switch may self cancel when activated
On affected machines the steering damper may suffer from manufacturing defects which may cause the steering damper to become stiffer than normal.
On affected vehicles the reverser control unit may be insufficiently sealed allowing moisture to lead to corrosion of the internal electrical contacts.
On motorcycles fitted with the accessory Vario side cases it is possible the locking catches for the lid do not engage and the lid is not securely locked in this circumstance the lid may…
Affected vehicles may have a programming error affecting the vehicles warm starting mode.
On affected vehicles the oil filter screw connection may come loose and oil may escape.
On affected vehicles the right-hand multifunction switch may allow moisture to ingress which may cause the ignition to turn off.
On affected vehicles the reverser control unit may be insufficiently sealed allowing moisture to lead to corrosion of the internal electrical contacts.
On motorcycles fitted with the accessory Vario top cases it is possible the case is not securely locked to the motorcycle and may detach.
On affected vehicles the Type Plate may contain incorrectly printed information or has information missing.
On affected vehicles it cannot be excluded that the improved starter relay has been mechanically damaged during installation.
On motorcycles fitted with the accessory Vario side cases it is possible the locking catches for the lid do not engage and the lid is not securely locked. In this circumstance the lid may…
On affected vehicles due to a manufacturing defect the proportional valve in the suspension strut may loosen over the course of the service life. This can result in a loss of the damping function
On affected motorcycles starter motor relay may fail due to potential corrosion from moisture
After a software update the individual settings in the DYNAMIC PRO riding mode may have been reset to the factory settings. As a result the wheelie detection may have been deactivated without the user…
A dimensionally incorrect fulcrum pin of that handbrake lever can cause a reduced blowby clearance.
After a software update the individual settings in the DYNAMIC PRO riding mode may have been reset to the factory settings. As a result the wheelie detection may have been deactivated without the user…
The transmission input shaft can break in rare cases where riding manoeuvres cause abrupt and major speed differences between engine and final drive.
The clutch cover screws may loosen due to a faulty anti-friction coating on the screw threads.
In some cases the free gearwheels 6th gear that were installed do not meet the specifications. For this reason extended full load operation in 6th gear can cause increased wear of thegearshift forks. In…
The screw connection of the horn to the frame may come loose under certain conditions.
The clutch cover screws may loosen due to a faulty anti-friction coating on the screw threads.