Bmw Motorrad S1000RR and M1000RR recall: A dimensionally incorrect fulcrum pin of that handbrake lever can cause a reduced blowby clearance.
Yes – some of these vehicles are being recalled
- What's wrong
- A dimensionally incorrect fulcrum pin of that handbrake lever can cause a reduced blowby clearance.
- What to do
- Contact a Bmw Motorrad dealer to book the free repair. The fulcrum pin of the milled handbrake lever will be replaced against a dimensionally correct fulcrum pin.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
A dimensionally incorrect fulcrum pin of that handbrake lever can cause a reduced blowby clearance.
The fix
The fulcrum pin of the milled handbrake lever will be replaced against a dimensionally correct fulcrum pin.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| S1000RR | 13 Sep 2022 | 9 Feb 2023 | 158 |
| M1000RR | 28 Sep 2022 | 5 Dec 2022 | 158 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 31 March 2023. This page summarises an official notice. Details can change – always follow the official notice.