Daimler Buses eCITARO recall: Bevel Gear installed with Wrong Ratio
The wrong bevel gear may be installed on the front axle steering. The required gear ratio for HD HDH SHD RHD and Intouro is 1.117:1. A Bevel gear with ratio of 1:1 was installed.…
Every UK recall and safety alert for Daimler Buses products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 6 listed.
The wrong bevel gear may be installed on the front axle steering. The required gear ratio for HD HDH SHD RHD and Intouro is 1.117:1. A Bevel gear with ratio of 1:1 was installed.…
On vehicles equipped with the B2E electrical/electronic architecture and the ICUC Gen6 instrument cluster certain status and fault messages are not consistently displayed to the driver in the ICUC. The root cause is an…
It has been determined that the external emergency valves may malfunction. The issue is caused by an excessively large bore diameter in a component of the door control valve. Because the diameter lies outside…
The EU directive for commercial vehicles with the Euro 6 emissions standard stipulates that the NOx sensor signal is regularly checked for plausibility. The IUPR monitor (In Use Performance Ratio) was defined for this…
It has been determined that due to a parameter error of the VRDU3 in the event of a fault in the SideGuardAssist assistance system (for example in the form of a sensor fault) the…
On affected vehicles the end pieces of the design trims installed on the left and right of the air conditioning system may tear and fall.