Fiat 500 recall: Instrument cluster may display incorrect information
Due to a nonconformity in the production process the instrument cluster may stick and display incorrect speed information.
Is there a recall on your Fiat? Check every DVSA safety recall for Fiat vehicles (197 since 1993) by model and year, with what's wrong and the free fix. 88 listed.
Due to a nonconformity in the production process the instrument cluster may stick and display incorrect speed information.
Due to a non-conformity in the production process the electrical power steering (EPS) must be replaced. This will prevent a potential loss of steering assistance. Loss of EPS functionality could increase the risk of…
On some Fiat 500L vehicles a layout non-conformity could cause abrasion of the supplementary heater (PTC) wiring. This could result in possible electric short-circuiting with the possibility of a loss of some vehicle safety.…
The EGR pipe could fracture due to a potential non-conformity the fractured pipe may damage the alternator resulting in a loss of battery voltage and potentially a loss of engine power.
Due to a non-conformity in the supplier's production process the front seat belt pretensioner could malfunction in the event of a collision.
The driver�s airbag was manufactured with an incorrectly manufactured airbag inflator initiator that may not ignite when a deployment voltage is provided to the initiator. As a result vehicles may experience a �non-deployment� of…
The driver�s airbag was manufactured with an incorrectly manufactured airbag inflator initiator that may not ignite when a deployment voltage is provided to the initiator. As a result vehicles may experience a �non-deployment� of…
Due to an error in the production process the engine camshaft may break.
The transmission could unexpectedly switch to the N position due to a nonconformity in the transmission wiring assembly process.
It has been identified that the maximum load capacity for the load restraint hooks in the load compartment of the vehicle has been incorrectly written in the Owner Handbook. The correct load capacity is…
It has been identified that due to the non-conforming layout of the airbag wiring and missing cut-proof protection the airbag wiring may interfere with the steering wheel wiring terminal. This can cause the abrasion…
It has been identified that the rear brake shoe lining material may not have been manufactured to the correct specification. This could result in a reduction in brake performance from the rear brakes.
It has been identified that due to a nonconformity in the transmission casing mount material there is a possibility that the casting may fail. This may affect the control of the vehicle.
In the event of a significant frontal collision the driver's airbag may not deploy correectly due to a non-conformity which occurred in the supplier's production process. The airbag when deployed may cause injury to…
The seat may not remain in position when subjected to greater than normal driving forces such as those involved in an impact. This may possibly cause injury to the driver/passenger seated in the right…
In some circumstances the driver and passenger may experience consequent switching off of the instrument panel light and possible deactivation of other electronic systems such as the ABS and airbags. The concern is caused…