Every UK recall and safety alert for Peugeot products, with what's wrong, which models or batches are affected and what to do. Updated automatically. 165 listed.
The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.
Counterweight could become detached and fall from the vehicle
There is a risk of inadvertent release to the front outer passenger seat belt.
Possible slackening of the front wishbone ball joint.
A plastic component inside the exhaust line could under certain conditions damage the Diesel particle filter.
The handbrake mechanism may not be correct to specification.
The fixing of an electrical harness on the centralised voltage maintaining device may not be tightened to specification.
Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.
The air conditioning compressor pulley could break and damage other components.
The rear suspension wishbone mountings bolts may not be correct to specification.
The fixing bolt of the front Suspension wishbone may not be correct to specification.
The steering rack assembly may not be correct to specification.
The universal clamp fixing bolt is not correctly fitted in the recess at the end of the steering column.
On the affected vehicles the bonding of the rear door window glass to the hinge assemblies may not conform to specification.
One or more of the wheel fixing bolts may be insufficiently tightened.
The tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime.
The cooling system strategy and the maximum temperature alert could cause the engine to overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning…
On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could…
Engine could overheat leading to failure in extreme cases
On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to…
On the affected vehicles the windscreen wiper motor breather system may not be To the correct specification. This could in some cases result in water ingress leading to jamming of the motor due to…