Is there a recall on your Toyota? Check every DVSA safety recall for Toyota vehicles (250 since 1993) by model and year, with what's wrong and the free fix. 166 listed.
There is a possibility that water could enter the cabin through the panels separating the cabin and the engine compartment. If this occurs water could reach and affect some electrical components such as the…
The seal between the fuel cap and fuel tank filler neck may not be installed correctly. As a result there is a risk of fuel leakage during driving or in case of vehicle rollover.…
There is a possibility that the bolts between the front shock absorber and knuckle have not been properly tightened. This may lead to breakage of the connection between the front shock absorber and the…
Some ground cable eyelets and/or the fixation of the airbag control unit may not have been tightened correctly. As a result there is a risk of various electrical malfunctions e.g. engine stall fire hazard…
There is a possibility that the bolts holding the steering valve on the steering rack are missing or have not been correctly tightened. This may affect control of the vehicle.
It has been identified there is a possibility one of the nuts fixing the brake pedal to the brake booster may not have been tightened to the correct specification. This could result in the…
It has been identified there is a possibility that the bolt(s) securing the road wheel(s) may not have been tightened to the correct specification. This could result a risk that the road wheel rim(s)…
It has been identified that due to a quality issue a crack or fracture can develop in the fuel passage of the fuel injector. This could therefore result in a fuel leak and possibly…
It has been identified that in the subject vehicles there is a possibility the container of the inflator of the driver�s side may rupture. Toyota has not been able to establish the cause of…
The passenger air bag inflator may have been incorrectly manufactured/assembled. This may allow leakage of compressed gas and partial inflation of the airbag without a deployment command.
The subject vehicles are equipped with a foot-operated parking brake system containing a parking brake cable and a crank lever which upon activation transmit the force of the parking brake pedal to the brake…
Due to improper programming of the airbag system in the Airbag Sensor Assembly (airbag control module) there is a possibility that the Airbag Sensor Assembly may erroneously detect a rollover and deploy the Curtain…
Under certain conditions the electrical terminal of the wiring harness connected to the Electronic Control Unit (ECU) of the EPS slide causes abrasion on the tin-plating layer of the connector. This can cause wear…
The vehicles are equipped with a fuel evaporative emission control unit (canister) assembled to the fuel tank. There is a possibility that a crack could develop on the resin channel for the emission gas…
On affected vehicles the curtain side air bag inflator may have a crack in a weld. If this crack propagates gas may leak and in certain conditions partially in inflate the air bag.
Headlamps manufactured to the incorrect specification may have been fitted and not may distribute light correctly.
There is a possibility that a strut top mounting bearing could be damaged when a high load is applied to the strut such as when the vehicle is driven over a large bump. If…
A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.
The vehicles are equipped with 3-point lap-shoulder belt assemblies in all-three rear seating positions. The inner belt (buckle portion) of each of the rear three seat belt assemblies is secured to the floor of…
In the event of a high-speed collision principally in the frontal direction there is a possibility that the lap belt webbing on the outboard seats of the second row could contact a portion of…
Under certain conditions condense water in the intake air can corrode the needle bearing housing. Due to corrosion of the bearing housing the sealing between intake air and the electrical actuator circuit of the…
Internal cluctch pistons may have been incorrectly manufacturerd. This may cause incorrect transmission operation.