Daimler Truck Econic recall: The aluminium housing on the high pressure side of the gas pressure regulator may develop cracks
The Natural Gas regulator may develop a crack
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
The Natural Gas regulator may develop a crack
Fuel leakages may occur and fumes may form inside the passenger compartment
The intercooler sleeve may detach.
Aluminium screws of the steering gear housing cover and the power pack could corrode and fail
Front seat belt may not be mounted correctly
Rear seat latches and centre seat belt retractor bolts may not be tightened to specification.
Possible loss of power whilst driving.
Incorrect permissible front axle figures were given on the VIN label.
The specified wall thickness of the fuel tank can in some places fall below the threshold.
Steering columns were produced not according to specification
There is a possibility that the hazard warning lights will not be activated after pressing the button in the center console.
Vehicles may not have been delivered with the current version of the printed operator's manual.
Wheels ordered and bought at the dealers may not be compatible.
The power assisted steering pipes may detach from the cooler.
The engine counterbalance shaft bearing bushing into the crankcase may be out of specification
Wheel nuts not tightened to the correct specification
A condenser may fail because of inadequate heat treatment in the airbag control unit.
Premature degradation of emission control component.
Potential for a thermal overload of auxiliary switchboard
A deviation in the production process may have led to a blowhole in the area of the front left suspension mounting point
Possible failure of flexible air brake hose to the front axle.
The front passenger seatbelt may not retain the passenger sufficiently in case of an accident with high impact.
The passenger outer seat belts may not be correct to specification
The passenger outer seat belts may not be correct to specification