Peugeot Rifter and Partner recall: The steering column may not be correct to specification
Steering columns were produced not according to specification.
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
Steering columns were produced not according to specification.
A condenser may fail because of inadequate heat treatment in the airbag control unit.
Improper tightening of the fuel pipe may lead to leakage and engine stall.
Steering columns were produced not according to specification
Front passenger airbag cushion may not have been sewn correctly
NOx sensor was not correctly tightened during manufacture on the production line
Emission values may be higher than expected.
Major overheating can occur in the area of the interior mirror on the windscreen due to the heating element of the front camera.
Vehicles may not have had their passenger airbag fixings �tightened� to the correct torque specification
The damper stays may not keep the back door open
Possible loss of the spare wheel whilst the vehicle is being driven
Possible insufficient weld in one corner of the pedal mount.
Vehicles were delivered with a higher transmission oil level than intended.
The screws of the power pack on the power steering may fail.
One of the caps on the high-voltage power distributor box may not be sufficiently secured.
The fitting of the rear left brake pipe may not be correct to specification
The high-voltage batteries could decouple from the electric drivetrain.
Incorrect operation of automatic gearbox may allow vehicle to roll away.
The required display logic of the brake wear indicator is incorrect.
The refrigerant used in the air conditioning system does not meet legal requirements
The main leaf or the ancillary leaf of the 2-leaf spring of the front axle could fracture.
The refrigerant used in the air conditioning system does not meet legal requirements.
The refrigerant used in the air conditioning system does not meet legal requirements
The brake pipe fixings may not conform to specification