Mazda Mazda3 recall: Wheel nuts may loosen
A manufacturing defect may cause the wheel nuts to loosen
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
A manufacturing defect may cause the wheel nuts to loosen
The airbag and seat belt minder indicator unit may display incorrect information
Vehicles could experience severe corrosion of metal components in the rear area of the roof bed.
The branch-off point of the main battery cable may corrode.
Passenger air bag may deploy incorrectly if activated.
The handbrake cable connector on the rear brake calliper may break
Un-fused Battery Monitoring System (BMS) Wire Chafing.
Soot may accumulate around the intake shutter valve on the inlet side of the engine.
Front headlamps full LED version headlamp vertical beam out of compliance.
The flange of the HPFP may not have been attached to the cylinder head according to specifications.
Undesired acceleration of the vehicle may occur whilst active cruise control is operational.
Potential risk of access step detachment from the vehicle body.
The oil pressure control solenoid valve may malfunction causing a blockage in the high oil pressure position when required for engine performance
The wheel bolts (left side) that may not have been tightened to specifications
A welded connection of the rear seat bench may not have been correctly performed.
It is possible that the latching connection on the wheel housing liner may fail.
The mounting for the head restraint may not be correctly welded to the outer backrest frame for the rear seat.
Bolts in the front chassis module may become loose.
Water may get into the vehicle interior and run onto the control units for the rear lid
Water may get into the vehicle interior and run onto the control units for the rear lid
An incorrect multiple fuse was installed in the electronics box.
The incorrect upper control arm has been assembled on the left side.
There is a possibility that due to a manufacturing error there is a crack on the frame of the left front seat.
The hand brake cable stopper may have been incorrectly formed in production and may fail.