Mercedes-Benz GLE recall: A welding stud on the main floor may be incorrectly welded
A welding stud on the main floor may not have been welded correctly
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
A welding stud on the main floor may not have been welded correctly
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
Ruptured flexible front brake hoses may occur from cyclic fatigue.
Corrosion of fixing rivets can lead to the side step shade becoming insecure
It is possible that the latching connection on the wheel housing liner may fail.
There is a possibility that due to a fault in the production process there is a crack on the frame of the left front seat.
A fuel tank that may not meet required material wall thickness specification
Possible Fuel leak from tank
Vehicles may not have had the rear spoiler properly attached
Internal malfunction of the air bag control unit
The rear end impact limiter might not have been installed in production.
Incorrectly coated nuts were used to secure the drive shaft and wheel hub on the rear axle.
Hazard warning and vehicle demisters may become inoperable
The electrical power steering wiring may have been damaged during assembly.
The blower regulator wiring could be damaged increasing the risk of fire.
The rigidity of a component securing the seat rail for the front passenger seat may be impaired
Premature degradation of emission control component
Drive shaft may fail.
The rear axle U-bolts may not be fastened according to specification.
First gear could be engaged with the vehicle in motion and the shift lever in the D position.
Due to a non-conformity in production fuel leakage may occur from the fuel tank
The body control module software may allow engine stop start behaviour that was not part of the emissions certification.
Blind spot detection system has been marked with the wrong ECE certification labelling.
Driver and passenger side head airbags may have been twisted on installation