Nissan NV400 (X62) recall: Incorrect software configuration in combi meter fitted to prem3 variant vehicles
Warning light not coming on with steering fault
All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
Warning light not coming on with steering fault
Gas fuel tanks fitted to affected vehicles may be affected by corrosion. Over time corrosion may weaken the tank wall(s) and the tank may burst.
The toe adjustment for the front axle was incorrectly calculated and set during production.
The lift axle actuator may experience thermal degradation during operation. This may also impact on other modules relays etc.
It has been determined that the A-Class 177 might have some missing welding points in the area of both front side members. It is possible that due to a deviation in the internal production…
On affected vehicles the nut of the bolted connections of the front (left and right) swivel joints on the wheel bearing housing may not have been tightened to the correct torque. in case of…
Over time irregularities in the crimp connection in conjunction with relative movements of the tin coated connector at the end of the wiring harness which connects to the tin coated blower regulator pin could…
On certain 2018 and 2019 Model Year Land Rover Range Rover and Range Rover Sport PHEV vehicles where the indicated fuel level on the fuel gauge shows approximately 30% the fuel tank is empty…
Steering arm may have insufficient forging status and become insecure
No warning light on the dashboard should the power steering fail
Risk of a diesel fuel leak in the engine bay
Lighting fault after LED fitment
We would like to make you aware that on a certain number of Astra J GTC Insignia B - Model Year 18 there is the possibility of oil leakage from the turbo charger oil…
The rear brake pistons may have been coated incorrectly potentially causing the brake pedal travel to increase under braking and the effectiveness of the rear brakes to be reduced. Gas bubbles may form in…
Incorrect operation of the Voltage Protection Device (VPD) may lead to the high voltage battery system intermittently switching off the Hybrid Electric Vehicle (HEV) motor whilst driving. If the fault occurs a warning light…
Rear caliper pistons incorrectly coated.
The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy.
On affected vehicles moisture may enter the electronic components and cause overheating and failure of the additional coolant pump. localised smoulder damage cannot be ruled out and in individual cases may cause vehicle to…
Possible incorrect welding due to human error of the 4 sections of the front engine under frame. This has been caused by an interruption in the welding process Possible brake of the welds Sub-frame…
The connecting links on the rear axle anti roll bar cannot be ensured over the life of the vehicle. This may lead to noise and an activated yellow warning light. This may impair the…
The positive battery cable to the front distribution box behind the glove box can become damaged by vibrations and frictional corrosion. This may cause a loss of electrical connection to the distributions box. Symptoms…
The plug-in contact of the positive battery cable on the front power distribution box can become damaged by vehicle vibrations and frictional corrosion.
The gearbox may not hold the vehicle in the park position when the vehicle is stationary (Position �P�). The vehicle may roll if the handbrake is not applied.
The connector pins of the occupant classification system to the airbag control unit might have been manufactured outside specification. After a period of time this may cause decativation of the passnger airbag.