All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
The propellant in the passengers front airbag inflator may deteriorate due to high temperature and humid conditions over a longer period in use. As a result the inflator body may rupture during airbag deployment…
The locking mechanism in the door latch assembly may not operate properly in high temperatures. As a result the door may not latch correctly and may unintentionally open whilst driving. This may affect one…
Due to inappropriate waterproofing water may be drawn into the front wiper motor and/or may cause corrosion of the wiper link ball joint. This may over time cause the wipers to fail.
The front seat belt webbing may jam in the belt guide loop. This may affect the operation of the belt.
The front seat belt webbing may jam in the belt guide loop. This may affect the operation of the belt. As a result the risk of injury may possibly be increased in the event…
on a certain number of Movano B - Model Year 17 and 18 the alerts on failures from power steering assist pump might not be indicated in the instrument cluster due to incorrect calibration…
on a certain number of Chevrolet Captiva (RHD) with 2.0L Diesel Engine Model Year 2007 - 2010 there is a potential for a fuel leak caused by a partial or complete disconnection of a…
The front seat side airbag bracket may not be secured and may not work correctly in the event of an accident. The airbag may fail to deploy in an accident.
on a certain number of Movano B - Model Year 16 and 17 with LWK or L0D engine there are some problems of the OBD (on Board Diagnostic) which should be indicated but do…
The blower-regulator wiring could be damaged and could lead to partial contact of individual wire strands.
Driver and front passenger door exterior handles may not have been installed correctly.
On some Alfa Romeo Stelvio vehicles due to a potential nonconformity some electric-electronic components may malfunction as a result of water infiltrations and their performance may be compromised. The vehicle may not function as…
It has been determined that the steering airbag electrical components are insufficiently grounded. Failure of the steering column module clock spring could result in an inadvertent deployment of the driver airbag which may cause…
On some Rio models the child locks on the rear doors may not operate; this is caused by the incorrect length release lever cable being installed.
On a limited production period a burr may have developed on the locking bar of the head restraint guide.
On a limited production period a burr may have developed on the locking bar of the head restraint guide.
Operation of the reversing lamp may be affected on certain vehicles. When the driver engages reverse gear and the Electric Park Brake (EPB) is applied the reversing lamps will not illuminate.
on a certain number of Antara (RHD) with 2.0L Diesel Engine Model Year 2007 - 2010 there is a potential for a fuel leak caused by a partial or complete disconnection of a fuel…
On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to…
On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to…
Affected vehicles may have been fitted with a defective side airbag initiator. This may cause the side airbag not to deploy in an accident.
Internal tests have shown that the longitudinal and transverse control arms installed on the affected vehicles may be prone to corrosion. The durability of these components cannot therefore be unequivocally guaranteed. f the fastening…
In a certain number of Insignia B - Model Year 18 the outer rear seatbelts might be incorrectly routed at anchor point. In the event of a frontal crash this may lead to a…
The Electric Power Control Unit (EPCU) to have some cracks in the aluminium casting which may cause the casting to become porous. The EPCU is cooled by a coolant channel and due to the…