All UK Cars, vans & lorries recalls and safety alerts, newest first, with the hazard, affected models and what to do next. 4,358 listed.
A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to…
A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to…
It has been identified the mounting bolts/nuts for the rear underrun device may not have been torqued to the correct specification. This could result in the rear underrun device becoming detached from the vehicle.
A deviation in the supplier manufacturing printing process on the glass panel caused may cause a loss of adhesion over vehicle lifetime. This may cause the sunroof panel to detach.
A deviation in the supplier manufacturing printing process caused a high viscosity in the black print which might lead to a loss of adhesion over vehicle lifetime.
Where a control unit coding was updated in a workshop between 3 December 2016 and 5 December 2016 the coding may not correspond to the specification and may trigger unplanned action in the vehicle.…
An improperly manufactured internal caliper gear may fail. This may cause the EPB not to release and in some circumstances not to apply. An EPB warning light and message should appear.
A number of vehicles specified with automatic transmissions may have been fitted with the incorrect specification rear driveshaft. The incorrect driveshaft length is shorter. The driver may experience underbody noise and/or notice an oil…
Following an accident the forces required for releasing the door may be increased. The cable between the inner door handle and the door lock not being to specification may not be able to withstand…
Under unique driving conditions such as if the accelerator pedal is depressed to the wide open throttle position after driving on a long descent with the use of cruise control there is a possibility…
Due to insufficient strength the front universal joint in the rear front universal joint of the rear prop shaft may fail.
On some of the vehicles affected by this recall the driver's air bag inflator may rupture during deployment. Metal shards may pass through the air bag material and cause injury to occupants.
It is possible that the connection between the B+ cable and the Power Distribution Box can become damaged by wear and heat which is caused by high current flow and high contact resistance. Normally…
A component in the gearbox actuator may not be to the correct specification which may affect gear selection.
A component in the gearbox actuator may not be to the correct specification which may affect gear selection.
It has been established that on certain vehicles fitted with an MDE5 engine they may have been delivered with a lower volume oil pan during production. There is a risk of the sump being…
The rear door child locks may deactivate when a door is slammed. There will be no warning that the child lock has gone from active to inactive.
In certain acceleration cases the automatic gearbox software does not engage the clutch fully and therefore the driver could experience a loss of drive and/or engine judder. The gearbox overheating warning light may also…
Due to inappropriate routing the ventilation line might rub against the battery positive cable which can cause a leakage over time. If leakage occurs fuel vapours will enter the engine compartment causing the risk…
Due to a poor earth connection steering power assistance may by lost.
The bonding of the tailgate spoiler may not conform to specification. This could lead to a lack of adhesion and detachment of the spoiler
It has been identified that the cab wiring harness can come in contact with a support bracket within the cab which can cause chaffing damage. This can result in either the engine cutting out…
It has been identified that the fuel filter/accumulator installed on the engine may crack causing the element to break which will ultimately resulting in fuel leakage. The issue can be identified to the driver…
It has been identified that due to corrosion there maybe a malfunction of the power supply within the Occupant Restraint Control (ORC) module. This could result in either an illuminated airbag warning lamp with…