BMW 7 SERIES and 5 SERIES recall: Brake switch may be activated permanently
- What's wrong
- The ball head connecting the brake pedal and the master brake cylinder the ball head might not be locked properly into the ball cage. If the driver accidentally pulls up the brake pedal the brake switch would be activated permanently. This will cause: The brake…
- What to do
- Contact a BMW dealer to book the free repair. Recall the vehicles that are likely to be affected and check the locking of the ball head on the brake pedal. If necessary the pedal mechanism will be replaced.
What’s wrong
The ball head connecting the brake pedal and the master brake cylinder the ball head might not be locked properly into the ball cage. If the driver accidentally pulls up the brake pedal the brake switch would be activated permanently. This will cause: The brake lamps to be illuminated even while driving A Check Control Message would not alert the driver. An engine start or gear selection would be possible without brake actuation. If the driver's door were opened after switching off the engine the gear would not switch automatically to P as designed.
The fix
Recall the vehicles that are likely to be affected and check the locking of the ball head on the brake pedal. If necessary the pedal mechanism will be replaced.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| 7 SERIES | 19 May 2017 | 20 May 2017 | 24 |
| 5 SERIES | 19 May 2017 | 20 May 2017 | 24 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 20 June 2017. This page summarises an official notice. Details can change – always follow the official notice.