Brp Can-Am 1 recall: Light and flasher electrical harness in front fenders may be loose and rub on the tyre
- What's wrong
- The position light and flasher electrical harnesses in the front fenders may be loose and rub on the tyre. Over time this could lead to a short circuit causing the engine to stall while driving without the ability to restart the vehicle. If this happens…
- What to do
- Contact a Brp Can-Am 1 dealer to book the free repair. Dealers will install locking ties under the fender to hold the wiring harness. In the event of a damaged harness the damaged harness section will be replaced
What’s wrong
The position light and flasher electrical harnesses in the front fenders may be loose and rub on the tyre. Over time this could lead to a short circuit causing the engine to stall while driving without the ability to restart the vehicle. If this happens the Vehicle Stability System (VSS) which includes the Anti-Blocking System (ABS) will not be available.
The fix
Dealers will install locking ties under the fender to hold the wiring harness. In the event of a damaged harness the damaged harness section will be replaced
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| RYKER 900 | 22 Mar 2018 | 19 Oct 2022 | 446 |
| RYKER RALLY 900 ACE | 22 Mar 2018 | 19 Oct 2022 | 446 |
| RYKER 900 ACE | 22 Mar 2018 | 19 Oct 2022 | 446 |
| RYKER 600 | 22 Mar 2018 | 19 Oct 2022 | 446 |
| RYKER RALLY 900R | 22 Mar 2018 | 19 Oct 2022 | 446 |
| RYKER AR 900 ACE | 22 Mar 2018 | 19 Oct 2022 | 446 |
| RYKER 600 ACE | 22 Mar 2018 | 19 Oct 2022 | 446 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 31 October 2022. This page summarises an official notice. Details can change – always follow the official notice.