Ducati Xdiavel / Xdiavel S recall: 1. loss of traction; 2. side stand may fail
- What's wrong
- 1. The final drive pulley retaining nut may loosen and cause significant wear to the pulley teeth allowing the gearbox secondary shaft to slip in the pulley with the attendant loss of drive. 2. The lower side plate fastening bolt for the side stand may…
- What to do
- Contact a Ducati dealer to book the free repair. Recall the machines that are likely to be affected to: 1. Replace the locking device and retorque the final drive pulley retaining nut. 2. Re mount the side stand and…
What’s wrong
1. The final drive pulley retaining nut may loosen and cause significant wear to the pulley teeth allowing the gearbox secondary shaft to slip in the pulley with the attendant loss of drive. 2. The lower side plate fastening bolt for the side stand may become loose and if not attended to could eventually fail allowing the machine to fall and be a risk to people in close proximity.
The fix
Recall the machines that are likely to be affected to: 1. Replace the locking device and retorque the final drive pulley retaining nut. 2. Re mount the side stand and plate using new torque settings thread lock and where applicable new bolts..
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Xdiavel / Xdiavel S | 14 Dec 2015 | 24 Jul 2016 | 350 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 20 October 2016. This page summarises an official notice. Details can change – always follow the official notice.