Fiat Chrysler Automobiles 500 recall: Front suspension control arm ball joint
Yes – some of these vehicles are being recalled
- What's wrong
- Affected vehicles may not have the correct installation and tightening between the suspension control arm and the steering knuckle joint.This may possibly result in the control arm bolt becoming detached from the knuckle seat whilst the vehicle is in motion In the worst case this…
- What to do
- Contact a Fiat Chrysler Automobiles dealer to book the free repair. Check installation of joint and if necessary correctly install joint.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
Affected vehicles may not have the correct installation and tightening between the suspension control arm and the steering knuckle joint.This may possibly result in the control arm bolt becoming detached from the knuckle seat whilst the vehicle is in motion In the worst case this could lead to loss of vehicle control.
The fix
Check installation of joint and if necessary correctly install joint.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| 500 | 31 Mar 2023 | 31 May 2023 | 199 |
| 500 | 31 Mar 2023 | 31 May 2023 | – |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 22 November 2023. This page summarises an official notice. Details can change – always follow the official notice.