Ford Kuga recall: B-pillar trim insulation too close to the seat belt pretentioner
Yes – some of these vehicles are being recalled
- What's wrong
- In the event of a colision which deploys the front seat belt retractor pre-tensioner there is a possibility that the insulation material on the inner face of lower 'B' pillar trim could be subjected to a concentrated heat source that could ignite the insulation material…
- What to do
- Contact a Ford dealer to book the free repair. Remove a section of the insulation material on both �B� pillar trims.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
In the event of a colision which deploys the front seat belt retractor pre-tensioner there is a possibility that the insulation material on the inner face of lower 'B' pillar trim could be subjected to a concentrated heat source that could ignite the insulation material resulting in fire.
The fix
Remove a section of the insulation material on both �B� pillar trims.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Kuga | 17 Jul 2012 | 19 Jun 2014 | 29,904 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 30 August 2017. This page summarises an official notice. Details can change – always follow the official notice.