Ford Ranger recall: The driver s seat belt might have the webbing routed through the anchor rubber trim sleeve instead of being routed through the metal anchor eyelet.
Yes – some of these vehicles are being recalled
- What's wrong
- The driver�s seat belt might have the webbing routed through the anchor rubber trim sleeve instead of being routed through the metal anchor eyelet.
- What to do
- Contact a Ford dealer to book the free repair. Carry out a visual inspection of the driver seat belt at the pre-tensioner. Any vehicle that has failed this inspection will be retained and the affected part will be replaced.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The driver�s seat belt might have the webbing routed through the anchor rubber trim sleeve instead of being routed through the metal anchor eyelet.
The fix
Carry out a visual inspection of the driver seat belt at the pre-tensioner. Any vehicle that has failed this inspection will be retained and the affected part will be replaced.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Ranger | 24 Aug 2022 | 28 Aug 2022 | 13 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 30 March 2023. This page summarises an official notice. Details can change – always follow the official notice.