Jeep Grand Cherokee recall: Front upper control arm to steering knuckle pinch bolts
Yes – some of these vehicles are being recalled
- What's wrong
- On affected vehicles the Upper Control Arm (UCA) pinch bolts may have been damaged during vehicle assembly. A damaged pinch bolt may break and result in the loss of clamp load between the UCA ball joint and the knuckle.
- What to do
- Contact a Jeep dealer to book the free repair. Replacement of the Upper Control Arm (UCA) pinch bolts.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
On affected vehicles the Upper Control Arm (UCA) pinch bolts may have been damaged during vehicle assembly. A damaged pinch bolt may break and result in the loss of clamp load between the UCA ball joint and the knuckle.
The fix
Replacement of the Upper Control Arm (UCA) pinch bolts.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Grand Cherokee | 3 Dec 2020 | 30 May 2023 | 66 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 28 June 2024. This page summarises an official notice. Details can change – always follow the official notice.