KTM Duke recall: Brakes may fail
- What's wrong
- Contact may occur between the wiring harness and the ABS modulator. An electrical connection may be created via the brake line between the ABS modulator and the vehicle ground. For this to occur the wiring harness must be frayed and must be in contact with…
- What to do
- Contact a KTM dealer to book the free repair. On affected machines screw ground wire onto the ABS modulator and fasten ground wire on the frame. Check the wiring harness for visible damage around the ABS modulator (chafing damaged…
What’s wrong
Contact may occur between the wiring harness and the ABS modulator. An electrical connection may be created via the brake line between the ABS modulator and the vehicle ground. For this to occur the wiring harness must be frayed and must be in contact with the ABS modulator and the brake line must be electrically conductive. A conductive brake line can overheat and ultimately melt which can result in failure of a brake system circuit.
The fix
On affected machines screw ground wire onto the ABS modulator and fasten ground wire on the frame. Check the wiring harness for visible damage around the ABS modulator (chafing damaged coating exposed wires etc.) and repair as necessary. Check routing of the entire wiring harness around the ABS modulator and secure to frame.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Duke | 7 Nov 2011 | 25 May 2016 | 979 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 15 December 2016. This page summarises an official notice. Details can change – always follow the official notice.