MAN Truck and Bus TGM and TGX recall: A friction weld seam has been over torqued at the manufacturer of the steering propshaft and incorrect guide rings installed
Yes – some of these vehicles are being recalled
- What's wrong
- A friction weld seam has been over torqued at the manufacturer of the steering propshaft and incorrect guide rings installed.
- What to do
- Contact a MAN Truck and Bus dealer to book the free repair. Replace the steering propshaft and guide rings.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
A friction weld seam has been over torqued at the manufacturer of the steering propshaft and incorrect guide rings installed.
The fix
Replace the steering propshaft and guide rings.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| TGM | 18 Jun 2020 | 29 Jun 2020 | 2 |
| TGX | 18 Jun 2020 | 29 Jun 2020 | 2 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 10 May 2021. This page summarises an official notice. Details can change – always follow the official notice.