Mercedes-Benz Vans SPRINTER 907 recall: The distance between the brake line and wiring harness may not be sufficient
Yes – some of these vehicles are being recalled
- What's wrong
- On certain Mercedes-Benz Sprinter vehicles the distance between the brake line and the wiring harness may not be sufficient.
- What to do
- Contact a Mercedes-Benz Vans dealer to book the free repair. Check and apply an anti-chafe protection to the affected components. If damage to the components is already evident then the affected components will be replaced and anti-chafe protection applied.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
On certain Mercedes-Benz Sprinter vehicles the distance between the brake line and the wiring harness may not be sufficient.
The fix
Check and apply an anti-chafe protection to the affected components. If damage to the components is already evident then the affected components will be replaced and anti-chafe protection applied.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| SPRINTER 907 | 20 Jul 2020 | 20 Aug 2021 | 12,696 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 17 December 2021. This page summarises an official notice. Details can change – always follow the official notice.