Mercedes-Benz Vans SPRINTER 910 recall: The connection between the steering shaft and steering gear may have been fitted with an incorrect bolt
Yes – some of these vehicles are being recalled
- What's wrong
- The bolted connection between the steering shaft and steering gear may have been fitted with a bolt of the wrong length.
- What to do
- Contact a Mercedes-Benz Vans dealer to book the free repair. Vehicles to be checked to confirm if the correct bolt is installed and replace it if this was not the case.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The bolted connection between the steering shaft and steering gear may have been fitted with a bolt of the wrong length.
The fix
Vehicles to be checked to confirm if the correct bolt is installed and replace it if this was not the case.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| SPRINTER 910 | 17 Sep 2018 | 18 Sep 2018 | 7 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 5 March 2019. This page summarises an official notice. Details can change – always follow the official notice.