Mercedes-Benz Vans Sprinter recall: Incorrectly implemented threaded connection of the propeller shaft intermediate bearings at the underbody
Yes – some of these vehicles are being recalled
- What's wrong
- The threaded connection of the propeller shaft intermediate bearings at the underbody has not been verifiably documented in certain Sprinter vehicles.
- What to do
- Contact a Mercedes-Benz Vans dealer to book the free repair. Renew the screws of the propeller shaft intermediate bearing and tighten them with the specified torque in the affected vehicles.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The threaded connection of the propeller shaft intermediate bearings at the underbody has not been verifiably documented in certain Sprinter vehicles.
The fix
Renew the screws of the propeller shaft intermediate bearing and tighten them with the specified torque in the affected vehicles.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Sprinter | 25 Nov 2019 | 2 Dec 2019 | 4 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 14 August 2020. This page summarises an official notice. Details can change – always follow the official notice.