Nissan Motor (GB) NV400 (X62) recall: The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
Yes – some of these vehicles are being recalled
- What's wrong
- The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
- What to do
- Contact a Nissan Motor (GB) dealer to book the free repair. Replace all injector sealing washers retaining plates bolts and pipes as necessary and tighten with the correct torque.
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.
The fix
Replace all injector sealing washers retaining plates bolts and pipes as necessary and tighten with the correct torque.
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| NV400 (X62) | 8 Dec 2001 | 16 Feb 2022 | 78 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 12 April 2023. This page summarises an official notice. Details can change – always follow the official notice.