Peugeot 208e recall: The rear lower shock absorber mounting bolt may not be tightened to the correct torque setting
Yes – some of these vehicles are being recalled
- What's wrong
- The rear lower shock absorber mounting bolt might not be tightened to the correct torque setting
- What to do
- Contact a Peugeot dealer to book the free repair. The campaign requires the bolt to be loosened and re-torqued to the correct setting
Source: Driver and Vehicle Standards Agency (DVSA)
Check your reg on DVSA ↗
What’s wrong
The rear lower shock absorber mounting bolt might not be tightened to the correct torque setting
The fix
The campaign requires the bolt to be loosened and re-torqued to the correct setting
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| 208e | 29 Oct 2019 | 28 Nov 2019 | 137 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 30 March 2020. This page summarises an official notice. Details can change – always follow the official notice.