Scania Truck Lpgrs recall: There should be 2 or 3 slots at each end of the track rod link. The ball joints at the ends of the track rod are secured by tightening a clamp over the slots. In some cases there have been instances of slots missing from the track rod link.
- What's wrong
- There should be 2 or 3 slots at each end of the track rod link. The ball joints at the ends of the track rod are secured by tightening a clamp over the slots. In some cases there have been instances of slots missing from…
- What to do
- Contact a Scania Truck dealer to book the free repair. Check the correct number of slots at each end of the track rod link. If there are slots missing the track rod must be renewed. For chassis found with incorrect…
What’s wrong
There should be 2 or 3 slots at each end of the track rod link. The ball joints at the ends of the track rod are secured by tightening a clamp over the slots. In some cases there have been instances of slots missing from the track rod link.�
The fix
Check the correct number of slots at each end of the track rod link. If there are slots missing the track rod must be renewed. For chassis found with incorrect track rods they are not to be released until the part is replaced.�
Vehicles affected
| Model | Built from | Built to | Vehicles |
|---|---|---|---|
| Lpgrs | 15 Feb 2021 | 1 May 2021 | 311 |
How to check your vehicle
Use the official DVSA checker with your registration number to see if your exact vehicle is included. If it is, the manufacturer should have written to the registered keeper. The repair is free, even if you bought the vehicle second-hand.
Updated 16 September 2022. This page summarises an official notice. Details can change – always follow the official notice.